Characteristics
The originality of our design consists in the automatic regulation of the moving conical stem, actuated by a hydraulic patented electronic control system; this allows the separation of oils and fats from the solid part in order to obtain an output product with minimum fat residuals: approx. 8-10%.
Its sturdy construction and the use of special treated steels for wear-subject parts permits to process any type of product; this is due to oversized mechanical parts with the capacity to bear power of 37 KW for ACTP10FS; 55 KW for ACTP20FS; 110 KW for ACTP40FS.

The average capacity is more than 1000 Kg/hr for the ACTP10FS; 2000 Kg/hr for the ACTP20FS; 4000 Kg/hr for the ACTP40FS. The above features permit the following performances:

• Instantaneous regulation of pressure and sensibility on a prefixed value.
• Reduction of possible breakdowns.
• Reduction of maintenance activities and manpower.
• Increase of production because of low down-time.
• Allows a constant and homogenous product.

The automatically operating hydraulic system is composed by two double acting cylinders, which actuate a semiconical stem.
This system contrast the exit of solid residuals contained in the cage in order to obtain a better separation of the oil for a product with a minimum residual oil.
In order to obtain an automatic pressing regulation we operate on the solenoid valves placed on top of the hydraulic control box coupled in series with a potentiometer connected to the power supply of the main motor.
This system allows the equilibrium between the amps absorbed and the pressure against the conical stem in order to control the opening of the discharge of solid product.
The implemented electronic system allows a differentiated sensibility according to production necessity.